Rocker Spring Plate Installation Guide

Please wear safety goggles and a mask to prevent exposure to any fiberglass dust.

Shop Replacement Spring Plates
1
We recommend using a drill press to create new holes. If unavailable, a standard drill coupled with a vice, vice grips, or clamps can be a viable alternative.
5
Use your old plate as a guide to drill new holes, maintaining a minimum of 3/8" gap between the edge of the plate and the outer hole edge for optimal structural integrity.
2
Inspect the assembly order before part removal to ensure correct reinstallation. The pieces need to go back in the exact sequence they were removed.
6
Perform a thorough inspection of the plates for any potential cracks before proceeding with installation.
3
Carefully detach the old plates from your chair while keeping the original hardware for the reassembly process.
7
The bolts and nuts should never be in direct contact with the plates. Be careful not to over-tighten.
4
Place an old plate on top of a new one and make sure they are securely attached.
8
With the installation complete, it's time to sit back, relax, and enjoy the rest of your day!